MAINTENANCE

Film Cleaning & Maintenance

DO NOT roll down windows for at least 5 days after installation

DO NOT clean windows for 14 days. This will allow time for the film adhesive to cure.

DRY OUT PERIOD

The length of the drying out period is dependent on temperature, humidity, quantity of mounting solution, film type and thickness. Depending on these conditions, full curing make take up to 30 days. This will allow time for the mounting adhesive to make an initial bond with the glass.

Visual changes during drying are a normal part of the adhesive bonding process. When the haziness and water pockets have disappeared, the film is considered dry and cured and is safe to be cleaned.

CONTINUING CARE

You may clean the inside part of the window with most automotive and house hold strength glass cleaners. Some cleaners are designed for use with window film and add life to your installation. A simple water and baby shampoo solution also works well.

NEVER USE BRUSHES, ABRASIVES OR STIFF PAPER PRODUCTS TO CLEAN YOUR FILM.

Use soft, 100% cotton micro fiber or lint free paper towels. Remember the film surface is scratch-resistant, not "scratch proof". A small amount of caution during cleaning will keep your film clean and clear for many years to come. 

  • Window Tint & Graphix
  • Window Tint & Graphix
  • Window Tint & Graphix
  • Window Tint & Graphix